Pocket Watch Case

In excellent cosmetic and working condition! Keeps time in all positions! Complete service (disassembly, cleaning, lubrication, adjustment). The serial number of the movement is 2053819. Which corresponds to the 1907 issue. The Enamel dial has a very short hairline (please see photo). But overall it is in very good condition. American Watch Case Co. The Case has no dents or deep scratches. All caps screw on easily and correctly. The Mineral Crystal is without chips or cracks. But has minor scratches from use and time. Crown and Ring are perfect. Pocket watch diameter 51 mm. CH 16831 Raquette Brisebard. The symbol of the Swiss Federal cross Swiss Federal Cross stamped onto a watch movement indicates a Swiss patent. The number 16831 alongside this in the centre of the regulator pivot on a balance cock indicates a Swiss patent titled “Raquette Brisebard”. Swiss patent CH16831 was granted to Charles Brisebard of Besançon, France, on 21 May 1898. And it was evidently assigned or licensed to Longines. The purpose of the design is to allow the regulator lever to be turned, without moving the curb pins, so that the regulator lever points to the centre of the scale on the balance cock. When the curb pins are moved to the correct place on the balance spring to bring the movement to time, the regulator pointer is usually slightly off centre on the scale. Usually the only way to change this is by adding or removing mass from the balance. The regulator lever, instead of being made as a single part, was made in two parts. One part comprises a complete ring with a long pointer/lever that points to the Faster/Slower scale on the balance cock. A second partial ring, which carries the curb pins on a radial arm, fits tightly around the ring on the end of the lever. The tight fit of the partial ring means that moving the lever will normally cause the partial ring and curb pins to move with it, but the partial ring can also be turned on the regulator lever ring by holding one and turning the other. The drawing shows a possible alignment, with the curb pin carrier in line with the regulator lever. Alternative positions of the curb pins are shown ghosted. The red arrows show how the parts are assembled to pivot in the normal way around a disc fixed to the balance cock by two screws. The green arrow indicates a small rectangular part which carries the curb pins and is fixed by a screw (not shown) to a slot in the carrier. The slot in the carrier allows the curb pins to be moved inwards or outwards. Please see all the photos, and if you have any questions. Please contact me, I will be happy to answer. For buyers from other countries, depending on current tariffs. You can write me your zip code to determine the exact cost.

All original, running condition, need service.

Longines Antique Early 1900′s Gold Colored A. Case has three initials engraved on it. Watch is not currently working and may need a repair and/or adjustment, some light scratches, colors may vary slightly in photos, Watch is approximately 1.3 inches, weight 39.92 grams. May be Gold Filled/plated unable to determine. For American Watch Case Company.

Superb mint looking Longines heavy gold filled hunting case with pretty patters, made in 1890′s. The watch runs strong and keeps good time. Due to the existent gold weight in these massive watches (at least 10 % of their weight) , they can’t no longer be cheap as they were once. The cost of gold has tripled in the last 10 years.

VINTAGE 47.7MM SHREVE & CO. LONGINES POCKET WATCH, STERLING SILVER HUNTING CASE. CASE: STERLING SILVER HUNTING CASE, ENGRAVED ON THE FRONT COVER, BOW IS TIGHT, GOOD CONDITION. DIAL: NICE CONDITION, FANCY HANDS. MOVEMENT: KEEPING TIME, HUNTING CASE, WINDS AT 3, PENDANT SET. Remember to save us on your FAVORITE SELLERS list! YOUR FEEDBACK IS VERY IMPORTANT TO US! Please take a short time to tell us how we are doing! We may be able to come up with a solution that will please both of us!

LONGINES POCKET WATCH 1900s. FULL HUNTER NICKEL CASE. NICKEL 3 FOLDERS CASE. CONDITION REPORT: THE CLOCK IS WORKING. APPARENTLY SOME JEWELS ARE MISSING, AS YOU CAN SEE IN THE PHOTOS.

OPEN FACE CASE SILVER 0,900. MOVEMENT SERIAL # 2.443.151. INCLUDES ANTIQUE WOODEN HOLDER. SEE PICTURES AND VIDEO.

May need some adjust. If you feel unhappy with this item, get in contact with me and you know that all problems could be solved. Combinará a postagem para várias vitórias. Por favor, peça fiscal note when terminar a cicitação.

Vintage “Longines” Pocket Watch, silver hunter case, 48 mm. In diameter, balance broken, dial, glass bezel and some parts missing, to restore or parts. CONDITION: Any defects not mentioned but visible in the pictures will be considered as described. Unless noted otherwise, our items are pre-owned and will have visual and physical cues typical of an item that has been used and handled. We work hard to identify all issues that we believe you would look for if you saw the item in person. Please be noticed that accuracy and water resistance are not guaranteed. Check out my other items.