Pocket Watch Case

Watchmaker’s estate Antique Longines pocket watch lot movements cases parts. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Watches\Pocket Watches”. The seller is “sdman1234″ and is located in this country: US. This item can be shipped worldwide.

• Brand: Longines
• Type: Pocket Watch
• Department: Men
• Vintage: Yes

We are offering, high quality wristwatch case WITH TOP SAPPHIRE & BOTTOM MINERAL CRYSTALS for marriage watches, using antique pocket watch movements. Each case is beautifully engraved. Diameter: 47.50 mm. Length including lugs: 70 mm. Thickness: 17.50 mm. Strap: 22.00 mm. With this bottom frame thickness of the case body is reduced to. (not counting top crystals dome). In addition to the standard. Stainless-steel grade 316 L. 3 parts case with. Top and bottom glazed with mineral glass. We have designed and created cases with. Screw-able bottom frames to make it easier to open and reach the mechanism for maintenance or repair. This replaces the more common press closing frames. With easy unscrewing of the bottom frame any enthusiast can fine-tune the accuracy of their watch by simply adjusting the hair spring regulator, without the need to go to a watchmaker. Both crystals are glued to the bezel and to the bottom frame, which offers greater water resistance. With this bottom frame thickness of the case body is. PLEASE VISIT OUR OTHER AUCTIONS. All our cases are ideal for Hebdomas and Hebdomas-style and chronograph pocket watch movements as well as Alpine, JWC Kal. 52 and 53, Longines, Moser, Omega, Tavannes, System Glashütte, etc. The watches pictured are samples of how the cases might be used and are not for sale. Our company is based in the UK. A top frame in a marriage watchcases usually being open only for installing of a movement. That is why we designed our cases with very tightly fit press closing top frame, which made it better moisture proof. To open it first loosen the frame by very lightly hammering a scalpel or any very thin blade into the gap in 2/3 places. It should make a small gap. Than use thinly sharpened back case opener or knife. Be careful not to scratch edges of both top frame and the case body. Our cases are designed to fit most sizes of movements. Nevertheless when installing any movement a slight adjustment of the case is required. For example, depending on the movement, a hole for a stem could be drilled in position 3 or 12 and a hole for a pusher in any appropriate position for a movement. The diameter of movements which can be fitted without any further adjustment to the case is 41.5 mm with a dial diameter of 43 mm. However using a watchmaker’s lathe our cases can be prepared for movements up to 44.5 mm and dials for up to 45 mm. It is worth noting that some movements have superfluous overhangs in the main plate. These could be easily turned, cutting down the diameter of the movement. When preparing antique movements for marriage watches we strongly recommend using a professional watchmaker familiar with the process. The item “ENGRAVED WRISTWATCH CASE TOP SAPPHIRE CRYSTALS FOR POCKET WATCH MOVEMENTS” is in sale since Saturday, December 4, 2021. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts\Other Watch Parts”. The seller is “tb.trading” and is located in Edinburgh. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia, New Zealand, Egypt, Reunion, South africa.

• Colour: Silver
• Country/Region of Manufacture: United Kingdom
• Compatible Brand: Does Not Apply
• Material: Stainless Steel
• Type of Part: Wristwatch Cases
• Modified Item: No
• Type: Case
• Compatible Model: Does Not Apply
• MPN: Does Not Apply
• Brand: Watches Reborn

We are offering, TWO (2) high quality wristwatch cases WITH TOP SAPPHIRE & BOTTOM MINERAL CRYSTALS for marriage watches, using antique pocket watch movements. Each case is beautifully engraved. Diameter: 47.50 mm. Length including lugs: 70 mm. Thickness: 17.50 mm. Strap: 22.00 mm. In addition to the standard. Stainless-steel grade 316 L. 3 parts case with. Top and bottom glazed with mineral glass. We have designed and created cases with. Screw-able bottom frames to make it easier to open and reach the mechanism for maintenance or repair. This replaces the more common press closing frames. With easy unscrewing of the bottom frame any enthusiast can fine-tune the accuracy of their watch by simply adjusting the hair spring regulator, without the need to go to a watchmaker. Both crystals are glued to the bezel and to the bottom frame, which offers greater water resistance. We also offer 2 other similar cases. One of the same size is fully engraved with top sapphire crystal (scratch resistant), second with. Thinner screw-able bottom frame. With top and bottom mineral crystals. Thickness: 14.65 mm. PLEASE VISIT OUR OTHER AUCTIONS. All our cases are ideal for Hebdomas and Hebdomas-style and chronograph pocket watch movements as well as Alpine, JWC Kal. 52 and 53, Longines, Moser, Omega, Tavannes, System Glashütte, etc. The watches pictured are samples of how the cases might be used and are not for sale. Our company is based in the UK. A top frame in a marriage watchcases usually being open only for installing of a movement. That is why we designed our cases with very tightly fit press closing top frame, which made it better moisture proof. To open it first loosen the frame by very lightly hammering a scalpel or any very thin blade into the gap in 2/3 places. It should make a small gap. Than use thinly sharpened back case opener or knife. Be careful not to scratch edges of both top frame and the case body. Our cases are designed to fit most sizes of movements. Nevertheless when installing any movement a slight adjustment of the case is required. For example, depending on the movement, a hole for a stem could be drilled in position 3 or 12 and a hole for a pusher in any appropriate position for a movement. The diameter of movements which can be fitted without any further adjustment to the case is 41.5 mm with a dial diameter of 43 mm. However using a watchmaker’s lathe our cases can be prepared for movements up to 44.5 mm and dials for up to 45 mm. It is worth noting that some movements have superfluous overhangs in the main plate. These could be easily turned, cutting down the diameter of the movement. When preparing antique movements for marriage watches we strongly recommend using a professional watchmaker familiar with the process. The item “2 ENGRAVED WRISTWATCH CASES TOP SAPPHIRE CRYSTALS FOR POCKET WATCH MOVEMENTS” is in sale since Sunday, September 22, 2019. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts\Other Watch Parts”. The seller is “tb.trading” and is located in Edinburgh. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia, New Zealand, Egypt, Reunion, South africa.

• Type of Part: Wristwatch Cases
• MPN: Does Not Apply
• Compatible Model: Does Not Apply
• Modified Item: No
• Country/Region of Manufacture: United Kingdom
• Material: Stainless Steel
• Colour: Silver
• Compatible Brand: Does Not Apply
• Brand: Watches Reborn
• Type: Case

Steel Case Doxa, Zenith. STAINLESS STEEL GLAZED Case with GLASS BACK for inserting of the lepine (pocket watch) movements. Stainless Steel – Grade 316L. Polished or matte finish. Glazed on both sides with mineral glass; front slightly curved, bottom flat. 49 mm length from lugs to lugs appr. 57 mm lugs width appr. 22 mm For other measures see diagrams below. This Case fit pocket watch movements as JWC Kal. 53, Longines, Tavannes, System Glashütte, Moser, Omega etc with the diameter 42 – 44 mm. The wrist watches on the pictures are not for sale. EDELSTAHLGEHÄUSE mit GLASBODEN zum Einbau von Lepine Taschenuhrwerken. Beidseitig mit Mineralglas verglast; vorne leicht gewölbt, Rückseite flach. Durchmesser ist von ca. 49 mm Länge inkl. 57 mm Bandanstoßbreite ca. 22 mm weitere Abmessungen finden Sie in den Abbildungen unten. Das Gehäuse ist zum Einbau von Lepine Taschenuhrwerken wie JWC Kal. 53, Longines, Tavannes, System Glashütte, Moser, Omega usw. Mit Durchmesser von ca. 42 – 44 mm. Die abgebildeten Armbanduhren stehen nicht zum Verkauf. Muster, nicht zum Verkauf / Samples, not for sale. The item “49mm STEEL Grade 316L CASE f INSERTING OF pocket watch movements Omega Doxa etc” is in sale since Saturday, October 31, 2020. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Watches for Parts”. The seller is “yevgen62″ and is located in Langenhagen. This item can be shipped worldwide.

• Movement Type: Mechanical (Manual)
• Compatible Brand: Longines Moser Minerva Doxa Nardin etc
• ATTENTION: case is NOT pre-drilled for crown or pusher
• Type: Wristwatch case
• Compatible Model: A. Lange & Söhne Omega Tissot Zenith
• Brand: Unbranded

We are offering, high quality wristwatch cases WITH TOP SAPPHIRE & BOTTOM MINERAL CRYSTALS for marriage watches, using antique pocket watch movements. Each case is beautifully engraved. Diameter: 47.50 mm. Length including lugs: 70 mm. Thickness: 17.50 mm. Strap: 22.00 mm. In addition to the standard. Stainless-steel grade 316 L. 3 parts case with. Top and bottom glazed with mineral glass. We have designed and created cases with. Screw-able bottom frames to make it easier to open and reach the mechanism for maintenance or repair. This replaces the more common press closing frames. With easy unscrewing of the bottom frame any enthusiast can fine-tune the accuracy of their watch by simply adjusting the hair spring regulator, without the need to go to a watchmaker. Both crystals are glued to the bezel and to the bottom frame, which offers greater water resistance. We also offer 2 other similar cases. One of the same size is fully engraved with top & bottom mineral crystals. Thinner screw-able bottom frame. With top and bottom mineral crystals. Thickness: 14.65 mm. PLEASE VISIT OUR OTHER AUCTIONS. All our cases are ideal for Hebdomas and Hebdomas-style and chronograph pocket watch movements as well as Alpine, JWC Kal. 52 and 53, Longines, Moser, Omega, Tavannes, System Glashütte, etc. The watches pictured are samples of how the cases might be used and are not for sale. Our company is based in the UK. A top frame in a marriage watchcases usually being open only for installing of a movement. That is why we designed our cases with very tightly fit press closing top frame, which made it better moisture proof. To open it first loosen the frame by very lightly hammering a scalpel or any very thin blade into the gap in 2/3 places. It should make a small gap. Than use thinly sharpened back case opener or knife. Be careful not to scratch edges of both top frame and the case body. Our cases are designed to fit most sizes of movements. Nevertheless when installing any movement a slight adjustment of the case is required. For example, depending on the movement, a hole for a stem could be drilled in position 3 or 12 and a hole for a pusher in any appropriate position for a movement. The diameter of movements which can be fitted without any further adjustment to the case is 41.5 mm with a dial diameter of 43 mm. However using a watchmaker’s lathe our cases can be prepared for movements up to 44.5 mm and dials for up to 45 mm. It is worth noting that some movements have superfluous overhangs in the main plate. These could be easily turned, cutting down the diameter of the movement. When preparing antique movements for marriage watches we strongly recommend using a professional watchmaker familiar with the process. The item “ENGRAVED WRISTWATCH CASES WITH TOP SAPPHIRE CRYSTALS FOR POCKET WATCH MOVEMENTS” is in sale since Sunday, September 22, 2019. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts”. The seller is “tb.trading” and is located in Edinburgh. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia, New Zealand, Egypt, Reunion, South africa.

• Modified Item: No
• Country/Region of Manufacture: United Kingdom
• MPN: Does Not Apply
• Type of Part: Wristwatch Cases
• Brand: Watches Reborn

Brand New 51 mm Stainless Steel Cases designed for Conversion Chronograph Pocket Watch Movements. Cases material: 316L Stainless Steel. Glasses: convex shape mineral glass on a front, flat mineral glass on a bottom. Thickness : 16,3 mm. Lug to lug: 60,4 mm. Inner part thickness: 9,8 mm. Inner part hole back diameter : 41. Mm (can be drilled to max 44 mm). Inner part hole front diameter: 42 mm. (can be drilled to max 44,5 mm). Max dial diameter: 44,5 mm. Band size: 24 mm. The case is NOT pre-drilled for crown. Crown come together with the case. The watch case press is needed to insert the bezels securely. OUR TEAM IS STANDING BY TO ASSIST YOU. We have been in business for over 10. And we stand behind our. Our customers are always our top priority and we strive for. The item “New 51 mm Stainless Steel Case for Conversion Chronograph Pocket Watch Movements” is in sale since Wednesday, September 4, 2019. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Pocket Watches\Tools & Parts”. The seller is “werk24watches” and is located in Wieliczka. This item can be shipped worldwide.

• MPN: Does Not Apply
• Brand: Unbranded

We are offering, high quality wristwatch cases of our in-house design for? Using antique pocket watch movements. This case is beautifully engraved and has got both mineral crystals. Diameter: 47.50 mm. Length including lugs: 70 mm. Thickness: 17.50 mm. Strap: 22.00 mm. In addition to the standard. Stainless-steel grade 316 L. 3 parts case with. Top and bottom glazed with mineral glass. We have designed and created cases with. Screw-able bottom frames to make it easier to open and reach the mechanism for maintenance or repair. This replaces the more common press closing frames. With easy unscrewing of the bottom frame any enthusiast can fine-tune the accuracy of their watch by simply adjusting the hair spring regulator, without the need to go to a watchmaker. Both crystals are glued to the bezel and to the bottom frame, which offers greater water resistance. We also offer 2 other similar cases. One of the same size is fully engraved with top sapphire crystal (scratch resistant), second with. Thinner screw-able bottom frame. With top and bottom mineral crystals. Thickness: 14.65 mm. PLEASE VISIT OUR OTHER AUCTIONS. All our cases are ideal for Hebdomas and Hebdomas-style and chronograph pocket watch movements as well as Alpine, JWC Kal. 52 and 53, Longines, Moser, Omega, Tavannes, System Glashütte, etc. The watches pictured are samples of how the cases might be used and are not for sale. Our company is based in the UK. A top frame in a marriage watchcases usually being open only for installing of a movement. That is why we designed our cases with very tightly fit press closing top frame, which made it better moisture proof. To open it first loosen the frame by very lightly hammering a scalpel or any very thin blade into the gap in 2/3 places. It should make a small gap. Than use thinly sharpened back case opener or knife. Be careful not to scratch edges of both top frame and the case body. Our cases are designed to fit most sizes of movements. Nevertheless when installing any movement a slight adjustment of the case is required. For example, depending on the movement, a hole for a stem could be drilled in position 3 or 12 and a hole for a pusher in any appropriate position for a movement. The diameter of movements which can be fitted without any further adjustment to the case is 41.5 mm with a dial diameter of 43 mm. However using a watchmaker? S lathe our cases can be prepared for movements up to 44.5 mm and dials for up to 45 mm. It is worth noting that some movements have superfluous overhangs in the main plate. These could be easily turned, cutting down the diameter of the movement. When preparing antique movements for marriage watches we strongly recommend using a professional watchmaker familiar with the process. The item “ENGRAVED WRISTWATCH CASES WITH MINERAL CRYSTALS FOR POCKET WATCH MOVEMENTS” is in sale since Saturday, February 23, 2019. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts”. The seller is “borkowy52″ and is located in Edinburgh. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia, New Zealand, Egypt, Reunion, South africa.

• Modified Item: No
• Country/Region of Manufacture: United Kingdom
• MPN: Does Not Apply
• Type of Part: Wristwatch Cases
• Brand: Watches Reborn

We are offering, high quality wristwatch cases of our in-house design for marriage watches using antique pocket watch movements. This case is highly polished with thinner. Crew-able bottom frame and. Diameter: 47.50 mm. Length including lugs: 70 mm. Thickness: 14.65 mm. Strap: 22.00 mm. In addition to the standard. Stainless-steel grade 316 L. 3 parts case with. Top and bottom glazed with mineral glass. We have designed and created cases with. Screw-able bottom frames to make it easier to open and reach the mechanism for maintenance or repair. This replaces the more common press closing frames. With easy unscrewing of the bottom frame any enthusiast can fine-tune the accuracy of their watch by simply adjusting the hair spring regulator, without the need to go to a watchmaker. Both crystals are glued to the bezel and to the bottom frame, which offers greater water resistance. We also offer another similar case, which is. Engraved in the middle part. Also on offer further. Similar type of cases. 2 fully engraved, one with. Crystal and one with both mineral crystals. Thickness: 17.50 mm. PLEASE VISIT OUR OTHER AUCTIONS. All our cases are ideal for Hebdomas and Hebdomas-style and chronograph pocket watch movements as well as Alpine, JWC Kal. 52 and 53, Longines, Moser, Omega, Tavannes, System Glashütte, etc. The watches pictured are samples of how the cases might be used and are not for sale. A top frame in a marriage watchcases usually being open only for installing of a movement. That is why we designed our cases with very tightly fit press closing top frame, which made it better moisture proof. To open it first loosen the frame by very lightly hammering a scalpel or any very thin blade into the gap in 2/3 places. It should make a small gap. Than use thinly sharpened back case opener or knife. Be careful not to scratch edges of both top frame and the case body. Our cases are designed to fit most sizes of movements. Nevertheless when installing any movement a slight adjustment of the case is required. For example, depending on the movement, a hole for a stem could be drilled in position 3 or 12 and a hole for a pusher in any appropriate position for a movement. The diameter of movements which can be fitted without any further adjustment to the case is 41.5 mm with a dial diameter of 43 mm. However using a watchmakers lathe our cases can be prepared for movements up to 44.5 mm and dials for up to 45 mm. It is worth noting that some movements have superfluous overhangs in the main plate. These could be easily turned, cutting down the diameter of the movement. When preparing antique movements for marriage watches we strongly recommend using a professional watchmaker familiar with the process. The item “H. POLISHED WRISTWATCH CASES WITH THIN BOTTOM FRAME FOR POCKET WATCH MOVEMENTS” is in sale since Saturday, February 23, 2019. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts”. The seller is “borkowy52″ and is located in Edinburgh. This item can be shipped worldwide.

• Type of Part: Wristwatch Cases
• Brand: Watches Reborn
• MPN: Does Not Apply
• Country/Region of Manufacture: United Kingdom
• Modified Item: No