Pocket Watch Case

Mainliner Style Pocket Watch Cases are highly sought after by collector. This case is produced by Classic Watch Case Co. There will only be 500 of these cases produced. You will receive Random Serial number from MLRG040 – MLRG500. There is Lever Cut on both right and left side to accommodate lever on both side. This case can also be use for Pendant/Crown set movement by pulling the crown. (See Ultra High Quality pictures for condition of the case). Both covers screw on / off. The CRYSTALS on this case Are Glass. Case Information Authorized Distributor for Classic Watch Case Co. Lever Cut to accommodate Lever Set Railroad Pocket Watch Movement. Maker: Classic Watch Case Co. Pocket Watch Size: 16S, Size 16. ABOUT CLASSIC WATCH CASE Co. Classic Watch Case Co. USA (CWCCO, USA), was form March 18, 2018. The idea started in April of 2015 with designing 16S salesman cases. It is US based company with manufacturing facility in Taiwan. United States made the best watches in the world. The movements are so amazing, craftsmanship is unparalleled in the world. The requirement of Railroad Grade specification is so stringent, it challenged American watch makers to the level no others can meet. The objective of Classic Watch Case Co. USA is to let the world know and appreciate these masterpieces and remember their legacy etched in history. However, the beauty is encased where no one can see it, so Classic Watch Case Co, USA intends to produce clear back cases (or now commonly known as display salesman cases) so collectors can appreciate and showcase the pride of ownership. USA is founded by American pocket watch collector. We, at CWCCO, USA know that all of the watch case companies of the past do not survive the economy because the demand is not enough to sustain the company. Similarly, CWCCO, USA will also face similar fate. For now, we would like to invest and promote pocket watch collection to younger generation of collectors. It took 1 ½ year to make with 5 failed molds. This gives us renew appreciation of the preciseness of past watch case makers. At that time, we also produced 1st release of 18S, Atlantica Model 1 – UU (Unsigned, Unserialized). Total quantity of Atlantica Model 1 will also be 800 pieces (400 Gold Plated and 400 Silver Plated). There were a total of (1,000) Pacifica Model 1-UU and (800) Atlantica Model 1-UU be produced. USA will only have 15 distributors worldwide. Since the creation of Pacifica and Atlantica, now, Classic Watch Case Co. Thank you for your support and we hope to bring new designs and models in the near future.

56 MM FAHYS18s Hinge Open Pocket Watch Case Antique Pocket watch Case – with Crystal. 56 MM FAHYS 18s Hinge open Pocket watch case. Lever Set Cut Closure. Lever set slot Hinged Open Bezel. 56 MM FAHYS 18s Hinge open Pocket watch case with Crystal. Please view all photo for actual detail condition Best offer save up to 30%.

Basic information? Brand: CATOREX Case type: Hunter case Movement: Manual winding (17 jewels) Case material: metal Case size: Approximately 30mm (excluding crown) Case thickness: approx. 28g Setting the time: pull the crown Dial: white Accessories: None Country of manufacture: Switzerland? Situation? Working item Measured using the Timegrapher app The daily difference was about +2 minutes 13 seconds. Time grapher is a simple measurement. Please consider this as a reference. Due to the winding condition of the mainspring, difference in posture, etc. Accuracy and power reserve will vary? After winding the mainspring Confirmed to operate for over 12 hours (No further measurements were taken) The above measurements are when placed flat at the time of listing. Measurements while wearing We have not carried it around to measure it. Please note that we do not know the status of these please note that? There are no noticeable scratches on the dial or windshield. There are no noticeable scratches on the case. Please check the photo? The crown can be set to the time. Please check carefully in the photo [About vintage watches] As this is an old watch, future accuracy and operation cannot be guaranteed. Thank you for your understanding NO.

For parts or repair, not working. Watch continually winds but does not run. A couple of corner chips on glass. See photos for full condition.

&#######x45;&#######x73;&#######x65;&#######x6C;&#######x74. &#######x52;&#######x65;&#######x73;&#######x70;&#######x6F;&#######x6E;&#######x73;&#######x69;&#######x76;&#######x65;&#######x20;&#######x44;&#######x65;&#######x73;&#######x69;&#######x67;&#######x6E;&#######x73;&#######x20;&#######x66;&#######x6F;&#######x72;&#######x20;&#######x65;&#######x42;&#######x61;&#######x79;&#######x20;&#######x53;&#######x65;&#######x6C;&#######x6C;&#######x65;&#######x72;&#######x73. Vintage Watch Dealer & Watch Repair. Send us a message. Antique Dueber Open Face Pocket Watch Case for 16 Size 20 Year Gold Filled. Item: Pocket Watch Case Brand: Dueber For Movement of Size Case Material: 20 Year Gold Filled. Outside Diameter: 49.1mm Inside Diameter: 42.8mm. Ok, overall condition for its age. There are scratches on the case. There are scratches on the crystal. It is missing the bow. Please be aware that these are vintage or antique watches, they will not be perfect nor keep perfect time even when serviced. If the watch does not say serviced, if you request a return saying it doesn’t keep time, you will be put on the blocked list. Are you looking for something similar? See our other items!

This is a good, strong everyday case. Both bezels screw on/ off and the pendant hardware is good. This case will work for any size 18 American movement including: Waltham, Illinois, Elgin, Hamilton, and others. This case can work for either lever or pendant set movements. Please use the photos as a big part of the description and please contact me with any questions.

English Regency Gilt and Patinated Bronze Figural Desk Timepiece, c. With a putti modelled standing on a weighted base holding aloft a silver gilt case dated 1797 with a chain and fusée verge movement signed (Samuel) Deacon, Barton and numbered 6297.

Case weight = 58.7 grams. With stem and crown. Measures 53mm outside diameter. Condition is very good for its age and type with typical scratches and nicks.