Pocket Watch Case

Steel Case Doxa, Zenith. STAINLESS STEEL GLAZED Case with GLASS BACK for inserting of the lepine (pocket watch) movements. Stainless Steel – Grade 316L. Polished or matte finish. Glazed on both sides with mineral glass; front slightly curved, bottom flat. 49 mm length from lugs to lugs appr. 57 mm lugs width appr. 22 mm For other measures see diagrams below. This Case fit pocket watch movements as JWC Kal. 53, Longines, Tavannes, System Glashütte, Moser, Omega etc with the diameter 42 – 44 mm. The wrist watches on the pictures are not for sale. EDELSTAHLGEHÄUSE mit GLASBODEN zum Einbau von Lepine Taschenuhrwerken. Beidseitig mit Mineralglas verglast; vorne leicht gewölbt, Rückseite flach. Durchmesser ist von ca. 49 mm Länge inkl. 57 mm Bandanstoßbreite ca. 22 mm weitere Abmessungen finden Sie in den Abbildungen unten. Das Gehäuse ist zum Einbau von Lepine Taschenuhrwerken wie JWC Kal. 53, Longines, Tavannes, System Glashütte, Moser, Omega usw. Mit Durchmesser von ca. 42 – 44 mm. Die abgebildeten Armbanduhren stehen nicht zum Verkauf. Muster, nicht zum Verkauf / Samples, not for sale. The item “49mm STEEL Grade 316L CASE f INSERTING OF pocket watch movements Omega Doxa etc” is in sale since Saturday, October 31, 2020. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Watches for Parts”. The seller is “yevgen62″ and is located in Langenhagen. This item can be shipped worldwide.

• Movement Type: Mechanical (Manual)
• Compatible Brand: Longines Moser Minerva Doxa Nardin etc
• ATTENTION: case is NOT pre-drilled for crown or pusher
• Type: Wristwatch case
• Compatible Model: A. Lange & Söhne Omega Tissot Zenith
• Brand: Unbranded

Wrist watch Poljot de Luxe, ultra slim, USSR Mechanical Watch Vintage Serviced. Watch model: Poljot de Luxe. Movement: Mechanical, Manual winding-up. Case Diameter: 34 mm. Case Diameter (with crown): 37mm. Also, I ask you to keep in mind if there are 2 or more items in the lot, then minimal differences are possible these are such as small scratches in different places, minor differences in printed materials, I ask you to name this in view of (as an option, you can request a photo before sending). If you have any problems or questions, write, we will solve everything together. If you have any questions or have problems with your order, do not hesitate to write. We can absolutely always agree. I will do everything to make you satisfied. The item “New! Poljot De Luxe Extra SLIM Watch Men’s Vintage USSR Case Stainless Steel” is in sale since Sunday, November 1, 2020. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Watches\Pocket Watches”. The seller is “igorvintageseller” and is located in Ternopil. This item can be shipped worldwide.

• Model: Poljot de Luxe
• Department: Men
• Case Color: Silver
• Case Material: Stainless Steel
• Movement: Mechanical (Manual)
• Type: Watch
• Year Manufactured: 1970-1979
• Vintage: Yes
• MPN: Does Not Apply
• Dial Color: Black
• Display: Analog
• Brand: Poljot
• Number of Jewels: 23 Jewels
• Water Resistance: Not Water Resistant
• Style: Luxury
• Dial Style: 12-Hour Dial
• Case Finish: Polished
• Band Type: Round
• Features: Acrylic Crystal
• Lug Width: 18 mm
• Case Size: 35mm/47mm/8mm

Brand New 52 mm Stainless Steel Cases designed for Conversion Antique Pocket Watch Movements. Cases material: 316L Stainless Steel. Glasses: convex shape mineral glass on a front, flat mineral glass on a bottom. Thickness : 13,8 mm. Lug to lug: 61,2 mm. Inner part thickness: 7 mm. The case is available in three diffirent thicknesses of the inner part. (7mm, 8,5 mm or 12 mm). Last picture in the gallery shows the diffirence. Inner part hole back diameter : 41. Mm (can be drilled to max 46 mm). Inner part hole front diameter: 42 mm. (can be drilled to max 47 mm). Max dial diameter: 47 mm. Band size: 24 mm. The case is NOT pre-drilled for crown. Crown come together with the case. The watch case press is needed to insert the bezels securely. OUR TEAM IS STANDING BY TO ASSIST YOU. We have been in business for over 10. And we stand behind our. Our customers are always our top priority and we strive for. The item “New 52mm Stainless Steel Case for Conversion Pocket Watch Movement 13,8 mm thick” is in sale since Sunday, October 13, 2019. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts\Other Watch Parts”. The seller is “werk24watches” and is located in Wieliczka. This item can be shipped worldwide.

• MPN: Does Not Apply
• Brand: Unbranded

The front glass is slightly domed, the bottom is flat. This case was designed to convert antique pocket watch to a wrist watch. The case fits size 16 movements (43.00 mm or 1.7 inches). The bezel and case back attached – snap on. The case is NOT pre-drilled for crown or pusher. Crown and pusher come together with the case. The watch case press is needed to insert the bezels securely. Diameter of the watch: 48.00 mm. Watch crystal diameter: 44.00 mm. Thickness: 12.00 mm. Lug to lug : 53.00 mm. Feel free to ask any questions. The item “New 48mm Stainless Steel Case for Conversion Antique Pocket Watch Movement” is in sale since Thursday, September 3, 2020. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts\Other Watch Parts”. The seller is “vilili1980″ and is located in Wilmette, Illinois. This item can be shipped worldwide.

• Material: Stainless Steel
• Metal: Stainless Steel
• Modified Item: No
• Type: Cases
• MPN: Does Not Apply
• Brand: Unbranded

Vintage “Lemania” Chronograph Split Seconds Rattrapante Pocket Watch, steel case, 65 mm. In diameter without the pendant, open face, all original, recent service, work Ok. CONDITION: Any defects not mentioned but visible in the pictures will be considered as described. Unless noted otherwise, our items are pre-owned and will have visual and physical cues typical of an item that has been used and handled. We work hard to identify all issues that we believe you would look for if you saw the item in person. Please be noticed that accuracy and water resistance are not guaranteed. Check out my other items. The item “Lemania Chronograph Split Seconds Rattrapante Pocket Watch Steel Case” is in sale since Thursday, July 16, 2020. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Watches\Pocket Watches”. The seller is “americadelsurwatches” and is located in Castelar, Buenos Aires. This item can be shipped worldwide.

• Department: Men
• Display: Analog
• Modified Item: No
• Country/Region of Manufacture: Switzerland
• Case Material: Stainless Steel
• Material: Steel
• Dial Style: 12-Hour Dial
• Year Manufactured: 1970-1979
• Country Made: Swisse
• Model: Chronograph Split Seconds Rattrapante
• Country of Manufacture: Switzerland
• Original or Reproduction: Original
• Pocket Watch Size: 65 mm. in diameter
• Brand: Lemania
• Style: Sport
• Closure: Open Face
• Movement: Mechanical (Hand-winding)
• Type: Pocket Watch

1950′s buren watch Borgel Francois (F B) steel Case f1. The diameter of this watch without the crown is 28.5 mm case. The case is all stainless steel stamped F. Borgel staybright steel and the back screws on and of as it should. The lug width or strap size is 16 mm. The condition of the balance is. The balance staff is good and swings freely and the watch runs strongly and keeps time when wound. The original dial and hands are in good vintage condition. You have to hold out the crown when you set the hands. This watch comes with its original dust cover which has kept the movement in very good condition. The item “1950′s buren watch Borgel Francois (F B) steel Case f1″ is in sale since Friday, September 11, 2020. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Watches\Pocket Watches”. The seller is “one4u2watch” and is located in buxton. This item can be shipped worldwide.

• Department: Men
• Style: Military
• Type: wrist
• Brand: Buren

Brand New 48,5 mm Stainless Steel Cases designed for Conversion Antique Pocket Watch Movements. Cases material: 316L Stainless Steel. Glasses: convex shape mineral glass on a front, flat mineral glass on a bottom. Diameter : 48,5 mm. Thickness : 14,8 mm. Lug to lug: 58 mm. Inner part thickness: 8,5 mm. Inner part hole back diameter : 41. (can be drilled to max 44 mm). Inner part hole front diameter: 43 mm. (can be drilled to max 44,5 mm). Max dial diameter: 44,5 mm. Band size: 22 mm. The case is NOT pre-drilled for crown. Crown come together with the case. The watch case press is needed to insert the bezels securely. OUR TEAM IS STANDING BY TO ASSIST YOU. We have been in business for over 10. And we stand behind our. Our customers are always our top priority and we strive for. The item “New 48,5 mm Stainless Steel Case for Conversion Antique Pocket Watch Movement” is in sale since Saturday, June 6, 2020. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts\Other Watch Parts”. The seller is “werk24watches” and is located in Wieliczka. This item can be shipped worldwide.

• MPN: Does Not Apply
• Brand: Unbranded

Brand New 52 mm Stainless Steel Cases designed for Conversion Antique Pocket Watch Movements. Cases material: 316L Stainless Steel. Glasses: convex shape mineral glass on a front, flat mineral glass on a bottom. Thickness : 15,4 mm. Lug to lug: 61,2 mm. Inner part thickness: 8,5 mm. The case is available in three diffirent thicknesses of the inner part. (7mm, 8,5 mm or 12 mm). Last picture in the gallery shows the diffirence. Inner part hole back diameter : 41. Mm (can be drilled to max 46 mm). Inner part hole front diameter: 42 mm. (can be drilled to max 47 mm). Max dial diameter: 47 mm. Band size: 24 mm. The case is NOT pre-drilled for crown. Crown come together with the case. The watch case press is needed to insert the bezels securely. OUR TEAM IS STANDING BY TO ASSIST YOU. We have been in business for over 10. And we stand behind our. Our customers are always our top priority and we strive for. The item “New 52mm Stainless Steel Case for Conversion Pocket Watch Movement 15,4 mm thick” is in sale since Monday, June 17, 2019. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts\Other Watch Parts”. The seller is “werk24watches” and is located in Wieliczka. This item can be shipped worldwide.

• MPN: Does Not Apply
• Brand: Unbranded

Brand New 46 mm Stainless Steel Cases designed for Conversion Antique Pocket Watch Movements. Cases material: 316L Stainless Steel. Glasses: convex shape mineral glass on a front, flat mineral glass on a bottom. Diameter : 46,3 mm. Thickness : 14,4 mm. Lug to lug: 56,8 mm. Inner part thickness: 7 mm. Inner part hole back diameter : 35,8. (can be drilled to max 38,5 mm). Inner part hole front diameter: 36 mm. (can be drilled to max 41,5 mm). Max dial diameter: 41,5 mm. Band size: 22 mm. The case is NOT pre-drilled for crown. Crown come together with the case. The watch case press is needed to insert the bezels securely. OUR TEAM IS STANDING BY TO ASSIST YOU. We have been in business for over 10. And we stand behind our. Our customers are always our top priority and we strive for. The item “New 46mm Stainless Steel Case for Conversion Pocket Watch Movement 14,4 mm thick” is in sale since Wednesday, September 4, 2019. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts\Other Watch Parts”. The seller is “werk24watches” and is located in Wieliczka. This item can be shipped worldwide.

• MPN: Does Not Apply
• Brand: Unbranded

Brand New 52 mm Stainless Steel Cases designed for Conversion Antique Pocket Watch Movements. Cases material: 316L Stainless Steel. Glasses: convex shape mineral glass on a front, flat mineral glass on a bottom. Thickness : 15,4 mm. Lug to lug: 61,2 mm. Inner part thickness: 8,5 mm. The case is available in three diffirent thicknesses of the inner part. (7mm, 8,5 mm or 12 mm). Last picture in the gallery shows the diffirence. Inner part hole back diameter : 41. Mm (can be drilled to max 46 mm). Inner part hole front diameter: 42 mm. (can be drilled to max 47 mm). Max dial diameter: 47 mm. Band size: 24 mm. The case is NOT pre-drilled for crown. Crown come together with the case. The watch case press is needed to insert the bezels securely. OUR TEAM IS STANDING BY TO ASSIST YOU. We have been in business for over 10. And we stand behind our. Our customers are always our top priority and we strive for. The item “New 52mm Stainless Steel Case for Conversion Pocket Watch Movement 15,4 mm thick” is in sale since Sunday, October 13, 2019. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts\Other Watch Parts”. The seller is “werk24watches” and is located in Wieliczka. This item can be shipped worldwide.

• Modified Item: No
• MPN: Does Not Apply
• Brand: Unbranded