Jul 31 2020

Seiko SBDC051 Submariner Case Mod 6R15 M’vmt Ceramic Bezel Sapphire Crystal 316L

Posted by admin in seiko
Seiko SBDC051 Submariner Case Mod 6R15 M'vmt Ceramic Bezel Sapphire Crystal 316L

Seiko SBDC051 Submariner Case Mod 6R15 M'vmt Ceramic Bezel Sapphire Crystal 316L

Seiko SBDC051 Submariner Case Mod 6R15 M'vmt Ceramic Bezel Sapphire Crystal 316L

Seiko SBDC051 Submariner Case Mod 6R15 M'vmt Ceramic Bezel Sapphire Crystal 316L

Seiko SBDC051 Submariner Case Mod 6R15 M'vmt Ceramic Bezel Sapphire Crystal 316L

Seiko SBDC051 Submariner Case Mod 6R15 M'vmt Ceramic Bezel Sapphire Crystal 316L

Seiko SBDC051 Submariner Case Mod 6R15 M'vmt Ceramic Bezel Sapphire Crystal 316L

Seiko SBDC051 Submariner Case Mod 6R15 M'vmt Ceramic Bezel Sapphire Crystal 316L

Seiko SBDC051 Submariner Case Mod 6R15 M'vmt Ceramic Bezel Sapphire Crystal 316L

Seiko SBDC051 Submariner Case Mod 6R15 M'vmt Ceramic Bezel Sapphire Crystal 316L

Seiko SBDC051 Submariner Case Mod 6R15 M'vmt Ceramic Bezel Sapphire Crystal 316L

Seiko SBDC051 Submariner Case Mod 6R15 M'vmt Ceramic Bezel Sapphire Crystal 316L

Is proud to present to you our handcrafted Seiko SBDC051 Submariner Mod. Custom Hand-finished Case, Brushed Lugs, Polished Sides. Custom Built Bracelet, Original Seiko Clasp Integrated to Solid Jubilee Bracelet. Fine Brushed Milled Clasp. The item “Seiko SBDC051 Submariner Case Mod 6R15 M’vmt Ceramic Bezel Sapphire Crystal 316L” is in sale since Sunday, July 26, 2020. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Watches\Pocket Watches”. The seller is “watchdogsupplyco” and is located in Rexburg, Idaho. This item can be shipped worldwide.
  • Type: Watch
  • MPN: ced-32672175161447
  • Brand: Watchdog Supply Co.
Feb 29 2020

Engraved Wristwatch Cases With Top Sapphire Crystals For Pocket Watch Movements

Posted by admin in engraved
Engraved Wristwatch Cases With Top Sapphire Crystals For Pocket Watch Movements

Engraved Wristwatch Cases With Top Sapphire Crystals For Pocket Watch Movements

Engraved Wristwatch Cases With Top Sapphire Crystals For Pocket Watch Movements

Engraved Wristwatch Cases With Top Sapphire Crystals For Pocket Watch Movements

Engraved Wristwatch Cases With Top Sapphire Crystals For Pocket Watch Movements

Engraved Wristwatch Cases With Top Sapphire Crystals For Pocket Watch Movements

Engraved Wristwatch Cases With Top Sapphire Crystals For Pocket Watch Movements

Engraved Wristwatch Cases With Top Sapphire Crystals For Pocket Watch Movements

Engraved Wristwatch Cases With Top Sapphire Crystals For Pocket Watch Movements

Engraved Wristwatch Cases With Top Sapphire Crystals For Pocket Watch Movements

We are offering, high quality wristwatch cases WITH TOP SAPPHIRE & BOTTOM MINERAL CRYSTALS for marriage watches, using antique pocket watch movements. Each case is beautifully engraved. Diameter: 47.50 mm. Length including lugs: 70 mm. Thickness: 17.50 mm. Strap: 22.00 mm. In addition to the standard. Stainless-steel grade 316 L. 3 parts case with. Top and bottom glazed with mineral glass. We have designed and created cases with. Screw-able bottom frames to make it easier to open and reach the mechanism for maintenance or repair. This replaces the more common press closing frames. With easy unscrewing of the bottom frame any enthusiast can fine-tune the accuracy of their watch by simply adjusting the hair spring regulator, without the need to go to a watchmaker. Both crystals are glued to the bezel and to the bottom frame, which offers greater water resistance. We also offer 2 other similar cases. One of the same size is fully engraved with top & bottom mineral crystals. Thinner screw-able bottom frame. With top and bottom mineral crystals. Thickness: 14.65 mm. PLEASE VISIT OUR OTHER AUCTIONS. All our cases are ideal for Hebdomas and Hebdomas-style and chronograph pocket watch movements as well as Alpine, JWC Kal. 52 and 53, Longines, Moser, Omega, Tavannes, System Glashütte, etc. The watches pictured are samples of how the cases might be used and are not for sale. Our company is based in the UK. A top frame in a marriage watchcases usually being open only for installing of a movement. That is why we designed our cases with very tightly fit press closing top frame, which made it better moisture proof. To open it first loosen the frame by very lightly hammering a scalpel or any very thin blade into the gap in 2/3 places. It should make a small gap. Than use thinly sharpened back case opener or knife. Be careful not to scratch edges of both top frame and the case body. Our cases are designed to fit most sizes of movements. Nevertheless when installing any movement a slight adjustment of the case is required. For example, depending on the movement, a hole for a stem could be drilled in position 3 or 12 and a hole for a pusher in any appropriate position for a movement. The diameter of movements which can be fitted without any further adjustment to the case is 41.5 mm with a dial diameter of 43 mm. However using a watchmaker’s lathe our cases can be prepared for movements up to 44.5 mm and dials for up to 45 mm. It is worth noting that some movements have superfluous overhangs in the main plate. These could be easily turned, cutting down the diameter of the movement. When preparing antique movements for marriage watches we strongly recommend using a professional watchmaker familiar with the process. The item “ENGRAVED WRISTWATCH CASES WITH TOP SAPPHIRE CRYSTALS FOR POCKET WATCH MOVEMENTS” is in sale since Sunday, September 22, 2019. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts”. The seller is “tb.trading” and is located in Edinburgh. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia, New Zealand, Egypt, Reunion, South africa.
  • Modified Item: No
  • Country/Region of Manufacture: United Kingdom
  • MPN: Does Not Apply
  • Type of Part: Wristwatch Cases
  • Brand: Watches Reborn
Mar 19 2019

Engraved Wristwatch Cases For Pocket Watch Movements, Top Sapphire Crystal

Posted by admin in engraved
Engraved Wristwatch Cases For Pocket Watch Movements, Top Sapphire Crystal

Engraved Wristwatch Cases For Pocket Watch Movements, Top Sapphire Crystal

Engraved Wristwatch Cases For Pocket Watch Movements, Top Sapphire Crystal

Engraved Wristwatch Cases For Pocket Watch Movements, Top Sapphire Crystal

Engraved Wristwatch Cases For Pocket Watch Movements, Top Sapphire Crystal

Engraved Wristwatch Cases For Pocket Watch Movements, Top Sapphire Crystal

Engraved Wristwatch Cases For Pocket Watch Movements, Top Sapphire Crystal

Engraved Wristwatch Cases For Pocket Watch Movements, Top Sapphire Crystal

Engraved Wristwatch Cases For Pocket Watch Movements, Top Sapphire Crystal

Engraved Wristwatch Cases For Pocket Watch Movements, Top Sapphire Crystal

Engraved Wristwatch Cases For Pocket Watch Movements, Top Sapphire Crystal

We are offering, high quality wristwatch cases of our in-house design for marriage watches using antique pocket watch movements. This case is beautifully engraved and has got both mineral crystals. Diameter: 47.50 mm. Length including lugs: 70 mm. Thickness: 17.50 mm. Strap: 22.00 mm. In addition to the standard. Stainless-steel grade 316 L. 3 parts case with. Top and bottom glazed with mineral glass. We have designed and created cases with. Screw-able bottom frames to make it easier to open and reach the mechanism for maintenance or repair. This replaces the more common press closing frames. With easy unscrewing of the bottom frame any enthusiast can fine-tune the accuracy of their watch by simply adjusting the hair spring regulator, without the need to go to a watchmaker. Both crystals are glued to the bezel and to the bottom frame, which offers greater water resistance. We also offer 2 other similar cases both with top and bottom mineral crystals. One is fully engraved of the same size. Thinner screw-able bottom frames. Thickness: 14.65 mm. PLEASE VISIT OUR OTHER AUCTIONS. All our cases are ideal for Hebdomas and Hebdomas-style and chronograph pocket watch movements as well as Alpine, JWC Kal. 52 and 53, Longines, Moser, Omega, Tavannes, System Glashütte, etc. The watches pictured are samples of how the cases might be used and are not for sale. A top frame in a marriage watchcases usually being open only for installing of a movement. That is why we designed our cases with very tightly fit press closing top frame, which made it better moisture proof. To open it first loosen the frame by very lightly hammering a scalpel or any very thin blade into the gap in 2/3 places. It should make a small gap. Than use thinly sharpened back case opener or knife. Be careful not to scratch edges of both top frame and the case body. Our cases are designed to fit most sizes of movements. Nevertheless when installing any movement a slight adjustment of the case is required. For example, depending on the movement, a hole for a stem could be drilled in position 3 or 12 and a hole for a pusher in any appropriate position for a movement. The diameter of movements which can be fitted without any further adjustment to the case is 41.5 mm with a dial diameter of 43 mm. However using a watchmakers lathe our cases can be prepared for movements up to 44.5 mm and dials for up to 45 mm. It is worth noting that some movements have superfluous overhangs in the main plate. These could be easily turned, cutting down the diameter of the movement. When preparing antique movements for marriage watches we strongly recommend using a professional watchmaker familiar with the process. The item “ENGRAVED WRISTWATCH CASES FOR POCKET WATCH MOVEMENTS, TOP SAPPHIRE CRYSTAL” is in sale since Saturday, February 23, 2019. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts”. The seller is “borkowy52″ and is located in Edinburgh. This item can be shipped worldwide.
  • Type of Part: Wristwatch Cases
  • Brand: Watches Reborn
  • MPN: Does Not Apply
  • Country/Region of Manufacture: United Kingdom
  • Modified Item: No
Nov 09 2018

Antique Agassiz Pocket Watch in Solid 18k Gold Diamond Sapphire Ruby Hunter Case

Posted by admin in antique
Antique Agassiz Pocket Watch in Solid 18k Gold Diamond Sapphire Ruby Hunter Case

Antique Agassiz Pocket Watch in Solid 18k Gold Diamond Sapphire Ruby Hunter Case

Antique Agassiz Pocket Watch in Solid 18k Gold Diamond Sapphire Ruby Hunter Case

Antique Agassiz Pocket Watch in Solid 18k Gold Diamond Sapphire Ruby Hunter Case

Antique Agassiz Pocket Watch in Solid 18k Gold Diamond Sapphire Ruby Hunter Case

Antique Agassiz Pocket Watch in Solid 18k Gold Diamond Sapphire Ruby Hunter Case

Antique Agassiz Pocket Watch in Solid 18k Gold Diamond Sapphire Ruby Hunter Case

Antique Agassiz Pocket Watch in Solid 18k Gold Diamond Sapphire Ruby Hunter Case

Antique Agassiz Pocket Watch in Solid 18k Gold Diamond Sapphire Ruby Hunter Case. Mechanical – Hand Wound – Likely 15 or 17 Jewels (Not Marked) – Swiss-Made. Solid 18k Yellow Gold. (21) Natural Genuine Diamonds – Old Mine and Old Single Cut – Burnish Set – G/H Color – VS2 Clarity – 0.65ctw approx. (4) Natural Genuine Sapphires – Old Single Cut – Burnish Set – Royal Blue Color – 0.12ctw approx. (4) Natural Genuine Rubies – Old Single Cut – Burnish Set – Blood Red Color – 0.12ctw approx. Antique Swiss pocket watch in outstanding, all original, condition! 100% working and ready for use! This magnificent pocket watch was made in Switzerland by the Agassiz Watch Co. And is cased in solid 18k yellow gold. The movement is 100% working and the case is absolutely impeccable. The case is beautifully etched and set with old cut diamonds, rubies, and sapphires. This is a wonderful luxury 18k gold pocket watch that is set with gorgeous gemstones and brilliant diamonds. 100% working and ready to use. Size and Weight Comparison Info. We are a family owned and operated business and have 2 brick and mortar stores. WE ARE ONE OF THE GOOD GUYS. We know you have many other choices and because of that we are always grateful for your business. The item “Antique Agassiz Pocket Watch in Solid 18k Gold Diamond Sapphire Ruby Hunter Case” is in sale since Saturday, August 4, 2018. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Pocket Watches\Antique”. The seller is “badisjewelers” and is located in Montclair, New Jersey. This item can be shipped worldwide.
  • Number of Jewels: 15 Jewels
  • Modified Item: No
  • Style: Luxury
  • Escapement Type: Lever
  • Pocket Watch Size: 0
  • Material: Solid Gold
  • Movement: Mechanical (Hand-winding)
  • Features: Seconds Sub-Dial
  • Year of Manufacture: 1880-1889
  • MPN: Does Not Apply
  • Closure: Double Hunter
  • Brand: Agassiz
  • Serial Number: 50324
Aug 26 2017

Wristwatch Case For Pocket Watch Movement Top Sapphire Crystal, Engraved

Posted by admin in wristwatch
Wristwatch Case For Pocket Watch Movement Top Sapphire Crystal, Engraved

Wristwatch Case For Pocket Watch Movement Top Sapphire Crystal, Engraved

Wristwatch Case For Pocket Watch Movement Top Sapphire Crystal, Engraved

Wristwatch Case For Pocket Watch Movement Top Sapphire Crystal, Engraved

Wristwatch Case For Pocket Watch Movement Top Sapphire Crystal, Engraved

Wristwatch Case For Pocket Watch Movement Top Sapphire Crystal, Engraved

Wristwatch Case For Pocket Watch Movement Top Sapphire Crystal, Engraved

Wristwatch Case For Pocket Watch Movement Top Sapphire Crystal, Engraved

Wristwatch Case For Pocket Watch Movement Top Sapphire Crystal, Engraved

Wristwatch Case For Pocket Watch Movement Top Sapphire Crystal, Engraved

Wristwatch Case For Pocket Watch Movement Top Sapphire Crystal, Engraved

Wristwatch Case For Pocket Watch Movement Top Sapphire Crystal, Engraved

We offer new to market and arguably unique wristwatch cases to make marriage watches using antique pocket watch movements with contemporary wristwatch cases. In addition to the standard. Stainless-steel grade 316 L. Top and bottom glazed with mineral glass. We have designed and created cases with screw-able bottom frames to make it easier to open and reach the mechanism for maintenance or repair. This replaces the more common press closing frames which often require a clamping tool and frequently results in broken glass. With easy unscrewing of the bottom frame any enthusiast can fine-tune the accuracy of their watch by simply adjusting the hair spring regulator, without the need to go to a watchmaker. Both crystals are glued to the bezel and to the bottom frame, which gives better water resistance. We offer 3 types of cases, two of which are beautifully engraved. Diameter: 47.50 mm. Length including lugs: 70 mm. Thickness: 17.50 mm. Strap: 22.00 mm. The cases are ideal for Hebdomas and Hedomas style pocket watch movements as well as Alpine, JWC Kal. 52 and 53, Longines, Moser, Omega, Tavannes, System Glashütte, etc. Please see our other offers. The watches pictured are samples of how the cases might be used and are not for sale. We also offer an assembling and mechanism restoration service by the top Polish Master Watchmaker. We can make up a watch using our own range of antique mechanisms or from one provided by you. The item “WRISTWATCH CASE FOR POCKET WATCH MOVEMENT TOP SAPPHIRE CRYSTAL, ENGRAVED” is in sale since Saturday, July 29, 2017. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts”. The seller is “borkowy52″ and is located in Edinburgh. This item can be shipped worldwide.
  • Type of Part: Crystals