Pocket Watch Case

We are offering, high quality wristwatch case WITH TOP SAPPHIRE & BOTTOM MINERAL CRYSTALS for marriage watches, using antique pocket watch movements. Each case is beautifully engraved. Diameter: 47.50 mm. Length including lugs: 70 mm. Thickness: 17.50 mm. Strap: 22.00 mm. With this bottom frame thickness of the case body is reduced to. (not counting top crystals dome). In addition to the standard. Stainless-steel grade 316 L. 3 parts case with. Top and bottom glazed with mineral glass. We have designed and created cases with. Screw-able bottom frames to make it easier to open and reach the mechanism for maintenance or repair. This replaces the more common press closing frames. With easy unscrewing of the bottom frame any enthusiast can fine-tune the accuracy of their watch by simply adjusting the hair spring regulator, without the need to go to a watchmaker. Both crystals are glued to the bezel and to the bottom frame, which offers greater water resistance. With this bottom frame thickness of the case body is. PLEASE VISIT OUR OTHER AUCTIONS. All our cases are ideal for Hebdomas and Hebdomas-style and chronograph pocket watch movements as well as Alpine, JWC Kal. 52 and 53, Longines, Moser, Omega, Tavannes, System Glashütte, etc. The watches pictured are samples of how the cases might be used and are not for sale. Our company is based in the UK. A top frame in a marriage watchcases usually being open only for installing of a movement. That is why we designed our cases with very tightly fit press closing top frame, which made it better moisture proof. To open it first loosen the frame by very lightly hammering a scalpel or any very thin blade into the gap in 2/3 places. It should make a small gap. Than use thinly sharpened back case opener or knife. Be careful not to scratch edges of both top frame and the case body. Our cases are designed to fit most sizes of movements. Nevertheless when installing any movement a slight adjustment of the case is required. For example, depending on the movement, a hole for a stem could be drilled in position 3 or 12 and a hole for a pusher in any appropriate position for a movement. The diameter of movements which can be fitted without any further adjustment to the case is 41.5 mm with a dial diameter of 43 mm. However using a watchmaker’s lathe our cases can be prepared for movements up to 44.5 mm and dials for up to 45 mm. It is worth noting that some movements have superfluous overhangs in the main plate. These could be easily turned, cutting down the diameter of the movement. When preparing antique movements for marriage watches we strongly recommend using a professional watchmaker familiar with the process. The item “ENGRAVED WRISTWATCH CASE TOP SAPPHIRE CRYSTALS FOR POCKET WATCH MOVEMENTS” is in sale since Saturday, December 4, 2021. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts\Other Watch Parts”. The seller is “tb.trading” and is located in Edinburgh. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia, New Zealand, Egypt, Reunion, South africa.

• Colour: Silver
• Country/Region of Manufacture: United Kingdom
• Compatible Brand: Does Not Apply
• Material: Stainless Steel
• Type of Part: Wristwatch Cases
• Modified Item: No
• Type: Case
• Compatible Model: Does Not Apply
• MPN: Does Not Apply
• Brand: Watches Reborn

We are offering, TWO (2) high quality wristwatch cases WITH TOP SAPPHIRE & BOTTOM MINERAL CRYSTALS for marriage watches, using antique pocket watch movements. Each case is beautifully engraved. Diameter: 47.50 mm. Length including lugs: 70 mm. Thickness: 17.50 mm. Strap: 22.00 mm. In addition to the standard. Stainless-steel grade 316 L. 3 parts case with. Top and bottom glazed with mineral glass. We have designed and created cases with. Screw-able bottom frames to make it easier to open and reach the mechanism for maintenance or repair. This replaces the more common press closing frames. With easy unscrewing of the bottom frame any enthusiast can fine-tune the accuracy of their watch by simply adjusting the hair spring regulator, without the need to go to a watchmaker. Both crystals are glued to the bezel and to the bottom frame, which offers greater water resistance. We also offer 2 other similar cases. One of the same size is fully engraved with top sapphire crystal (scratch resistant), second with. Thinner screw-able bottom frame. With top and bottom mineral crystals. Thickness: 14.65 mm. PLEASE VISIT OUR OTHER AUCTIONS. All our cases are ideal for Hebdomas and Hebdomas-style and chronograph pocket watch movements as well as Alpine, JWC Kal. 52 and 53, Longines, Moser, Omega, Tavannes, System Glashütte, etc. The watches pictured are samples of how the cases might be used and are not for sale. Our company is based in the UK. A top frame in a marriage watchcases usually being open only for installing of a movement. That is why we designed our cases with very tightly fit press closing top frame, which made it better moisture proof. To open it first loosen the frame by very lightly hammering a scalpel or any very thin blade into the gap in 2/3 places. It should make a small gap. Than use thinly sharpened back case opener or knife. Be careful not to scratch edges of both top frame and the case body. Our cases are designed to fit most sizes of movements. Nevertheless when installing any movement a slight adjustment of the case is required. For example, depending on the movement, a hole for a stem could be drilled in position 3 or 12 and a hole for a pusher in any appropriate position for a movement. The diameter of movements which can be fitted without any further adjustment to the case is 41.5 mm with a dial diameter of 43 mm. However using a watchmaker’s lathe our cases can be prepared for movements up to 44.5 mm and dials for up to 45 mm. It is worth noting that some movements have superfluous overhangs in the main plate. These could be easily turned, cutting down the diameter of the movement. When preparing antique movements for marriage watches we strongly recommend using a professional watchmaker familiar with the process. The item “2 ENGRAVED WRISTWATCH CASES TOP SAPPHIRE CRYSTALS FOR POCKET WATCH MOVEMENTS” is in sale since Sunday, September 22, 2019. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts\Other Watch Parts”. The seller is “tb.trading” and is located in Edinburgh. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia, New Zealand, Egypt, Reunion, South africa.

• Type of Part: Wristwatch Cases
• MPN: Does Not Apply
• Compatible Model: Does Not Apply
• Modified Item: No
• Country/Region of Manufacture: United Kingdom
• Material: Stainless Steel
• Colour: Silver
• Compatible Brand: Does Not Apply
• Brand: Watches Reborn
• Type: Case

HAMILTON – SALESMAN DISPLAY CASE – 18 SIZE – PENDANT OR LEVER SET. CASE IS DOUBLED MARKED HAMILTON – MARKED ON BOTH BEZELS! SLOT AT 2 O’CLOCK FOR LEVER SET MOVEMENTS. BEAUTIFULLY POLISHED SILVER CASE. THERE ARE TWO NEW GLASS CRYSTALS INSTALLED – 1.5MM THICK. FRONT AND REAR ARE SNAP ON BEZELS – BOTH ARE SNAP VERY SNUG. ONE BEZEL HAS SMALL EDGE CRACK NEAR 11 O’CLOCK – DOES NOT AFFECT SNAP. READY FOR YOUR 18 SIZE (18S) POCKET WATCH MOVEMENT! LOOKS FANTASTIC – YOU WILL BE PLEASED – PLEASE SEE PHOTOS. PLEASE CHECK OUT MY OTHER AUCTIONS. The item “HAMILTON 18 SIZE POCKET WATCH SALESMAN DISPLAY CASE TWO NEW CRYSTALS” is in sale since Wednesday, December 16, 2020. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Watches\Pocket Watches”. The seller is “kqroessle” and is located in Temperance, Michigan. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay, Russian federation.

• Brand: Hamilton
• Type: Pocket Watch
• Case Color: Silver
• Closure: Open Face
• Style: Salesman Case
• Country/Region of Manufacture: United States
• Case Finish: Polished
• Department: Unisex Adult
• Vintage: Yes
• Pocket Watch Size: 18

We are offering, high quality wristwatch cases WITH TOP SAPPHIRE & BOTTOM MINERAL CRYSTALS for marriage watches, using antique pocket watch movements. Each case is beautifully engraved. Diameter: 47.50 mm. Length including lugs: 70 mm. Thickness: 17.50 mm. Strap: 22.00 mm. In addition to the standard. Stainless-steel grade 316 L. 3 parts case with. Top and bottom glazed with mineral glass. We have designed and created cases with. Screw-able bottom frames to make it easier to open and reach the mechanism for maintenance or repair. This replaces the more common press closing frames. With easy unscrewing of the bottom frame any enthusiast can fine-tune the accuracy of their watch by simply adjusting the hair spring regulator, without the need to go to a watchmaker. Both crystals are glued to the bezel and to the bottom frame, which offers greater water resistance. We also offer 2 other similar cases. One of the same size is fully engraved with top & bottom mineral crystals. Thinner screw-able bottom frame. With top and bottom mineral crystals. Thickness: 14.65 mm. PLEASE VISIT OUR OTHER AUCTIONS. All our cases are ideal for Hebdomas and Hebdomas-style and chronograph pocket watch movements as well as Alpine, JWC Kal. 52 and 53, Longines, Moser, Omega, Tavannes, System Glashütte, etc. The watches pictured are samples of how the cases might be used and are not for sale. Our company is based in the UK. A top frame in a marriage watchcases usually being open only for installing of a movement. That is why we designed our cases with very tightly fit press closing top frame, which made it better moisture proof. To open it first loosen the frame by very lightly hammering a scalpel or any very thin blade into the gap in 2/3 places. It should make a small gap. Than use thinly sharpened back case opener or knife. Be careful not to scratch edges of both top frame and the case body. Our cases are designed to fit most sizes of movements. Nevertheless when installing any movement a slight adjustment of the case is required. For example, depending on the movement, a hole for a stem could be drilled in position 3 or 12 and a hole for a pusher in any appropriate position for a movement. The diameter of movements which can be fitted without any further adjustment to the case is 41.5 mm with a dial diameter of 43 mm. However using a watchmaker’s lathe our cases can be prepared for movements up to 44.5 mm and dials for up to 45 mm. It is worth noting that some movements have superfluous overhangs in the main plate. These could be easily turned, cutting down the diameter of the movement. When preparing antique movements for marriage watches we strongly recommend using a professional watchmaker familiar with the process. The item “ENGRAVED WRISTWATCH CASES WITH TOP SAPPHIRE CRYSTALS FOR POCKET WATCH MOVEMENTS” is in sale since Sunday, September 22, 2019. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts”. The seller is “tb.trading” and is located in Edinburgh. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia, New Zealand, Egypt, Reunion, South africa.

• Modified Item: No
• Country/Region of Manufacture: United Kingdom
• MPN: Does Not Apply
• Type of Part: Wristwatch Cases
• Brand: Watches Reborn

We are offering, high quality wristwatch cases of our in-house design for? Using antique pocket watch movements. This case is beautifully engraved and has got both mineral crystals. Diameter: 47.50 mm. Length including lugs: 70 mm. Thickness: 17.50 mm. Strap: 22.00 mm. In addition to the standard. Stainless-steel grade 316 L. 3 parts case with. Top and bottom glazed with mineral glass. We have designed and created cases with. Screw-able bottom frames to make it easier to open and reach the mechanism for maintenance or repair. This replaces the more common press closing frames. With easy unscrewing of the bottom frame any enthusiast can fine-tune the accuracy of their watch by simply adjusting the hair spring regulator, without the need to go to a watchmaker. Both crystals are glued to the bezel and to the bottom frame, which offers greater water resistance. We also offer 2 other similar cases. One of the same size is fully engraved with top sapphire crystal (scratch resistant), second with. Thinner screw-able bottom frame. With top and bottom mineral crystals. Thickness: 14.65 mm. PLEASE VISIT OUR OTHER AUCTIONS. All our cases are ideal for Hebdomas and Hebdomas-style and chronograph pocket watch movements as well as Alpine, JWC Kal. 52 and 53, Longines, Moser, Omega, Tavannes, System Glashütte, etc. The watches pictured are samples of how the cases might be used and are not for sale. Our company is based in the UK. A top frame in a marriage watchcases usually being open only for installing of a movement. That is why we designed our cases with very tightly fit press closing top frame, which made it better moisture proof. To open it first loosen the frame by very lightly hammering a scalpel or any very thin blade into the gap in 2/3 places. It should make a small gap. Than use thinly sharpened back case opener or knife. Be careful not to scratch edges of both top frame and the case body. Our cases are designed to fit most sizes of movements. Nevertheless when installing any movement a slight adjustment of the case is required. For example, depending on the movement, a hole for a stem could be drilled in position 3 or 12 and a hole for a pusher in any appropriate position for a movement. The diameter of movements which can be fitted without any further adjustment to the case is 41.5 mm with a dial diameter of 43 mm. However using a watchmaker? S lathe our cases can be prepared for movements up to 44.5 mm and dials for up to 45 mm. It is worth noting that some movements have superfluous overhangs in the main plate. These could be easily turned, cutting down the diameter of the movement. When preparing antique movements for marriage watches we strongly recommend using a professional watchmaker familiar with the process. The item “ENGRAVED WRISTWATCH CASES WITH MINERAL CRYSTALS FOR POCKET WATCH MOVEMENTS” is in sale since Saturday, February 23, 2019. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts”. The seller is “borkowy52″ and is located in Edinburgh. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia, New Zealand, Egypt, Reunion, South africa.

• Modified Item: No
• Country/Region of Manufacture: United Kingdom
• MPN: Does Not Apply
• Type of Part: Wristwatch Cases
• Brand: Watches Reborn

150+ 17 LIGNE HUNT CASE POCKET WATCH CRYSTALS BR644. PLEASE CONTACT ME IF THERE IS A PROBLEM WITH YOUR ORDER!!!!!!!!! For your consideration we have a lot of 150 plus 17 ligne (ligne the crystal size) hunt case pocket watch crystals. Some need to be cleaned. Most have the size markers. They are in usable condition. Sizes range from 38.3 mm – 40.5 mm. The LIGNE is equal to the twelfth part of the French Inch, which is approximately 1/16th larger than our own inch. Mm or roughly 2¼ mm. Thus a 10 ligne movement should measure 22.5mm. In inches this would be 0.8881 as the LIGNE is equal to. 0888 parts of an inch. Please refer to pictures for more information. Note that we try winding the movements and then state our observations as we write the ads. We are not able to comment on how long each movement is actually running, nor can we always diagnose all the shortcomings of a movement should it not run. We try our best to give you accurate and honest information about the condition and potential of each item! In most cases, we put our items next to the ruler to give you a sense of size not to give you a measurement. Camera angles, lighting, and many other variables can distort the actual measurements. Please see description for actual measurements. Please contact me with any questions! Here are some definitions to help you understand our watch descriptions. Running and keeping time. Has not been tested for time or duration. Running but has not been tested for time or duration. It will run for short periods of time. The second hand does advance. Movement will need to be serviced. Balance staff looks good / Good staff. Balance wheel spins free and clear when shaken. Balance staff will need to be replaced, or other repair is required to repair. A note about feedback. And would’ve been able to accommodate them, and I believe to their satisfaction. We try to do the best job we can describing the item but we are not perfect and would like the opportunity to correct any mistakes that we’ve made. International Buyers Please Note. These charges are the buyers responsibility. Thank you for your cooperation, Jim. Designated trademarks and brands are the property of their respective owners. Powered by SixBit’s eCommerce Solution. The item “150+ 17 LIGNE HUNT CASE POCKET WATCH CRYSTALS BR644″ is in sale since Friday, September 29, 2017. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Pocket Watches\Tools & Parts”. The seller is “jrclocker” and is located in Nazareth, Pennsylvania. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Portugal, Cyprus, Slovenia, Japan, Sweden, Belgium, France, Ireland, Netherlands, Poland, Spain, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Norway, Ukraine, Croatia.

• MPN: Does Not Apply
• Type: Crystals
• UPC: Does Not Apply
• Era: Vintage

We offer new to market and arguably unique wristwatch cases to make marriage watches using antique pocket watch movements with contemporary wristwatch cases. In addition to the standard. Stainless-steel grade 316 L. Top and bottom glazed with mineral glass. We have designed and created cases with screw-able bottom frames to make it easier to open and reach the mechanism for maintenance or repair. This replaces the more common press closing frames which often require a clamping tool and frequently results in broken glass. With easy unscrewing of the bottom frame any enthusiast can fine-tune the accuracy of their watch by simply adjusting the hair spring regulator, without the need to go to a watchmaker. Both crystals are glued to the bezel and to the bottom frame, which gives better water resistance. We offer 3 types of cases, two of which are beautifully engraved. Diameter: 47.50 mm. Length including lugs: 70 mm. Thickness: 17.50 mm. Strap: 22.00 mm. The cases are ideal for Hebdomas and Hedomas style pocket watch movements as well as Alpine, JWC Kal. 52 and 53, Longines, Moser, Omega, Tavannes, System Glashütte, etc. Please see our other offers. The watches pictured are samples of how the cases might be used and are not for sale. We also offer an assembling and mechanism restoration service by the top Polish Master Watchmaker. We can make up a watch using our own range of antique mechanisms or from one provided by you. The item “WRISTWATCH CASE FOR POCKET WATCH MOVEMENT WITH MINERAL CRYSTALS, ENGRAVED” is in sale since Saturday, July 29, 2017. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Other Watches”. The seller is “borkowy52″ and is located in Edinburgh. This item can be shipped worldwide.

We offer new to market and arguably unique wristwatch cases to make marriage watches using antique pocket watch movements with contemporary wristwatch cases. In addition to the standard. Stainless-steel grade 316 L. Top and bottom glazed with mineral glass. We have designed and created cases with screw-able bottom frames to make it easier to open and reach the mechanism for maintenance or repair. This replaces the more common press closing frames which often require a clamping tool and frequently results in broken glass. With easy unscrewing of the bottom frame any enthusiast can fine-tune the accuracy of their watch by simply adjusting the hair spring regulator, without the need to go to a watchmaker. Both crystals are glued to the bezel and to the bottom frame, which gives better water resistance. We offer 3 types of cases, two of which are beautifully engraved. Diameter: 47.50 mm. Length including lugs: 70 mm. Thickness: 17.50 mm. Strap: 22.00 mm. The cases are ideal for Hebdomas and Hedomas style pocket watch movements as well as Alpine, JWC, Longines, Moser, Omega, Tavannes, System Glashütte, etc. Please see our other offers. The watches pictured are samples of how the cases might be used and are not for sale. We also offer an assembling and mechanism restoration service by the top Polish Master Watchmaker. We can make up a watch using our own range of antique mechanisms or from one provided by you. The item “WRISTWATCH CASE FOR POCKET WATCH MOVEMENT WITH MINERAL CRYSTALS, POLISHED” is in sale since Saturday, July 29, 2017. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts”. The seller is “borkowy52″ and is located in Edinburgh. This item can be shipped worldwide.

• Type of Part: Cases