Mar 18 2019

47mm Stainless Steel Mat Case for Installation Movements Moser Nardin Omega &

Posted by admin in 47mm
47mm Stainless Steel Mat Case for Installation Movements Moser Nardin Omega &

47mm Stainless Steel Mat Case for Installation Movements Moser Nardin Omega &. The description of this item has been automatically translated. Steel Case OMEGA LONGINES ELGIN IWC PATEK NARDIN MOSER. STAINLESS STEEL GLAZED CASE for inserting of the lepine (pocket watch) movements with GLASS BACK. Stainless steel – grade 316L. 3 pieces, glazed on bothsides with mineral glass. Appr 47,7 mm length from lugs to lugs appr. 70 mm lugs width appr. 22 mm For other measures see diagrams below. This case fit pocket watch movements as JWC Kal. 52, Cal 53, Longines, Tavannes, system glassworks Moser, Omega etc with the diameter 42-44 mm and height till 8mm. The wrist watches on the pictures are not for sale. STAINLESS STEEL CASE with glass bottom for the installation of Lepine pocket watch movements. Stainless steel grade 316 L. 3 pieces, both sides glazed with mineral glass. Diameter of about 47,7 mm Length including lugs 70 mm Band lug width approx 22 mm other dimensions, refer to the figures below. The housing is designed for installation of Lepine pocket watch movements as JWC Kal. 52, Cal 53, Longines, Tavannes, System Glashütte, Moser, Omega, etc. With a diameter of about 42-44 mm and height up to 8mm. The watches pictured are not for sale. For more information and to Our Terms and Conditions please visit our m I Section. You can read at German policy details on the e -Site. The pushers are as matte and polished available. OHNE Bohrungen für Krone & Drücker. The item “47mm Stainless Steel Mat Case for Installation Movements Moser Nardin Omega &” is in sale since Thursday, May 18, 2017. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Pocket Watches”. The seller is “yevgen62″ and is located in Langenhagen, Niedersachsen. This item can be shipped worldwide.
  • Antique: Modern (2000-present)
  • ATTENTION: WITHOUT Holes for Crown & Press clasp
  • MPN: Does Not Apply
  • Material: Stainless Steel
  • Year of Manufacture: 2010-Now
  • EAN: Does not apply
  • Brand: Unbranded
Mar 23 2018

47mm Acciaio inossidabile lucidato CASE da incasso TU MECCANISMI DOXA Longines

Posted by admin in 47mm
47mm Acciaio inossidabile lucidato CASE da incasso TU MECCANISMI DOXA Longines

47mm Acciaio inossidabile lucidato CASE da incasso TU MECCANISMI DOXA Longines. La descrizione di questo articolo è stata tradotta automaticamente. Se hai dubbi o domande, ti invitiamo a contattarci. CASSA IN ACCIAIO SATINATO per l’inserimento del lepine (orologio da tasca) i movimenti con vetro posteriore. In acciaio inox – grado 316L. 3 pezzi, smaltate su bothsides con vetro minerale. Appr 47,7 mm lunghezza da alette di alette ca. 70 millimetri alette larghezza ca. 22 millimetri Per le altre misure, vedi diagrammi qui sotto. Questo caso adatta tasca orologio movimenti come JWC Kal. 53, Longines, Tavannes, sistema Szk³a, Moser, Omega ecc con il diametro mm 42-44. Gli orologi da polso per le immagini non sono in vendita. CASSA IN ACCIAIO con fondo di vetro per l’installazione di meccanismi di orologi da tasca Lepine. Grado dell’acciaio inossidabile 316L. Versione lucidata a specchio. 3 teilig, beidseitig mit Mineralglas verglast. Diametro di circa 47,7 mm Lunghezza compreso alette 70 millimetri Banda lug larghezza di ca 22 millimetri altre dimensioni, fare riferimento alle figure sottostanti. L’alloggiamento è per l’installazione dell’orologio da tasca Lepine lavora come JWC Kal. 53, Longines, Tavannes, sistema Szk³a, Moser, Omega, ecc con un diametro di circa 42-44 mm. Die abgebildeten Armbanduhren stehen nicht zum Verkauf. Come consumatore, è possibile annullare l’acquisto senza dare motivazioni entro un mese. Per ulteriori informazioni e per I nostri Termini e Condizioni si prega di visitare il nostro m ich Sezione. Accetto i ritorni entro 30 giorni. Potete leggere in dettagli politici tedeschi sulla e -Site. Gli spacciatori sono così opaca e lucida disponibile. OHNE Bohrungen für Krone & Drücker. The item “47mm Acciaio inossidabile lucidato CASE da incasso TU MECCANISMI DOXA Longines” is in sale since Tuesday, December 30, 2014. This item is in the category “Orologi e gioielli\Orologi, ricambi e accessori\Orologi da tasca”. The seller is “yevgen62″ and is located in Langenhagen, Niedersachsen. This item can be shipped worldwide.
  • Materiale: Acciaio Inox
  • ATTENZIONE: SENZA Fori per Corona & Grilletto
  • Anno Di Produzione: 2010-presente
  • EAN: Non applicabile
  • Marca: – Senza marca/Generico -
  • MPN: Non applicabile
Jan 27 2018

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

Posted by admin in 47mm
New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New Stainless Steel Case 47mm for Conversion Antique Pocket Watch Movement. The front glass is slightly domed, the bottom is flat. This case was designed to convert antique pocket watch to a wrist watch. The case fits size 16 movements (43.3 mm or 1.7 inches). The case is NOT pre-drilled for crown or pusher. Crown and pusher come together with the case. Diameter of the watch: 47.00 mm. Watch crystal diameter: 44.00 mm. Thickness: 13.00 mm. Feel free to ask any questions. The item “New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement” is in sale since Tuesday, January 09, 2018. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts\Other Watch Parts”. The seller is “vilili1980″ and is located in Wilmette, Illinois. This item can be shipped worldwide.
  • Type of Part: Cases
  • Metal: Stainless Steel
  • Material: Stainless Steel
Sep 29 2017

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

Posted by admin in 47mm
New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New Stainless Steel Case 47mm for Conversion Antique Pocket Watch Movement. The front glass is slightly domed, the bottom is flat. This case was designed to convert antique pocket watch to a wrist watch. The case fits size 16 movements (43.3 mm or 1.7 inches). The case is NOT pre-drilled for crown or pusher. Crown and pusher come together with the case. Diameter of the watch: 47.00 mm. Watch crystal diameter: 44.00 mm. Thickness: 13.00 mm. Feel free to ask any questions. The item “New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement” is in sale since Monday, September 04, 2017. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts\Other Watch Parts”. The seller is “vilili1980″ and is located in Wilmette, Illinois. This item can be shipped worldwide.
Aug 19 2017

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

Posted by admin in 47mm
New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

The front glass is slightly domed, the bottom is flat. This case was designed to convert antique pocket watch to a wrist watch. The case fits size 16 movements (43.3 mm or 1.7 inches). The case is NOT pre-drilled for crown or pusher. Crown and pusher come together with the case. The watch case press is needed to insert the bezels securely. Diameter of the watch: 47.80 mm. Watch crystal diameter: 44.00 mm. Thickness: 13.00 mm. Lug to lug : 56.8 mm. Feel free to ask any questions. The item “New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement” is in sale since Friday, July 28, 2017. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts\Other Watch Parts”. The seller is “vilili1980″ and is located in Wilmette, Illinois. This item can be shipped worldwide.
Aug 19 2017

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

Posted by admin in 47mm
New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

The front glass is slightly domed, the bottom is flat. This case was designed to convert antique pocket watch to a wrist watch. The case fits size 16 movements (43.3 mm or 1.7 inches). The case is NOT pre-drilled for crown or pusher. Crown and pusher come together with the case. The watch case press is needed to insert the bezels securely. Diameter of the watch: 47.80 mm. Watch crystal diameter: 44.00 mm. Thickness: 13.00 mm. Lug to lug : 56.8 mm. Feel free to ask any questions. The item “New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement” is in sale since Friday, July 28, 2017. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts\Other Watch Parts”. The seller is “vilili1980″ and is located in Wilmette, Illinois. This item can be shipped worldwide.
Aug 19 2017

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

Posted by admin in 47mm
New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

The front glass is slightly domed, the bottom is flat. This case was designed to convert antique pocket watch to a wrist watch. The case fits size 16 movements (43.3 mm or 1.7 inches). The case is NOT pre-drilled for crown or pusher. Crown and pusher come together with the case. The watch case press is needed to insert the bezels securely. Diameter of the watch: 47.80 mm. Watch crystal diameter: 44.00 mm. Thickness: 13.00 mm. Lug to lug : 56.8 mm. Feel free to ask any questions. The item “New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement” is in sale since Friday, July 28, 2017. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts\Other Watch Parts”. The seller is “vilili1980″ and is located in Wilmette, Illinois. This item can be shipped worldwide.
Aug 19 2017

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

Posted by admin in 47mm
New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement

The front glass is slightly domed, the bottom is flat. This case was designed to convert antique pocket watch to a wrist watch. The case fits size 16 movements (43.3 mm or 1.7 inches). The case is NOT pre-drilled for crown or pusher. Crown and pusher come together with the case. The watch case press is needed to insert the bezels securely. Diameter of the watch: 47.80 mm. Watch crystal diameter: 44.00 mm. Thickness: 13.00 mm. Lug to lug : 56.8 mm. Feel free to ask any questions. The item “New 47mm Stainless Steel Case for Conversion Antique Pocket Watch Movement” is in sale since Friday, July 28, 2017. This item is in the category “Jewelry & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Parts\Other Watch Parts”. The seller is “vilili1980″ and is located in Wilmette, Illinois. This item can be shipped worldwide.
Aug 19 2017

47mm ACCIAIO INOX OPACO CASE per Inserto Meccanismo orologi MOSER NARDIN OMEGA &

Posted by admin in 47mm
47mm ACCIAIO INOX OPACO CASE per Inserto Meccanismo orologi MOSER NARDIN OMEGA &

47mm ACCIAIO INOX OPACO CASE per Inserto Meccanismo orologi MOSER NARDIN OMEGA &. La descrizione di questo articolo è stata tradotta automaticamente. Se hai dubbi o domande, ti invitiamo a contattarci. Cassa in acciaio OMEGA LONGINES ELGIN IWC PATEK NARDIN MOSER. CASSA IN ACCIAIO SATINATO per l’inserimento del lepine (orologio da tasca) i movimenti con vetro posteriore. Acciaio inossidabile – Grado 316 L. 3 pezzi, smaltate su bothsides con vetro minerale. Appr 47,7 mm lunghezza da alette di alette ca. 70 millimetri alette larghezza ca. 22 millimetri Per le altre misure, vedi diagrammi qui sotto. Questa custodia movimenti in forma di orologi da tasca come JWC Kal. 52, Cal 53, Longines, Tavannes, vetrerie sistema Moser, Omega ecc con il diametro di 42-44 mm e altezza fino a 8 millimetri. Gli orologi da polso per le immagini non sono in vendita. CASSA IN ACCIAIO con fondo di vetro per l’installazione di meccanismi di orologi da tasca Lepine. Grade in acciaio inox 316 L. 3 teilig, beidseitig mit Mineralglas verglast. Diametro di circa 47,7 mm Lunghezza compreso alette 70 millimetri Banda lug larghezza di ca 22 millimetri altre dimensioni, fare riferimento alle figure sottostanti. La custodia è progettata per l’installazione di meccanismi di orologi da tasca Lepini come JWC Kal. 52, Cal 53, Longines, Tavannes, Sistema Glashütte, Moser, Omega, ecc, con un diametro di circa 42-44 mm e altezza fino a 8 mm. Die abgebildeten Armbanduhren stehen nicht zum Verkauf. Come consumatore, è possibile annullare l’acquisto senza dare motivazioni entro un mese. Per ulteriori informazioni e per I nostri Termini e Condizioni si prega di visitare il nostro m ich Sezione. Accetto i ritorni entro 30 giorni. Potete leggere in dettagli politici tedeschi sulla e -Site. Per un costo aggiuntivo, è ancora possibile ottenere una corona e uno spacciatore. Si prega di chiedere al venditore. Le corone sono con diametro di 8,3 mm e 9,5 mm ed è disponibile nelle versioni lucida e opaca. È possibile ottenere una corona e una spinta per il pagamento. Le corone sono disponibili con un diametro di 8.3 mm e 9.5 mm e le versioni come lucido o opaco. Gli spacciatori sono così opaca e lucida disponibile. SENZA fori per corona & spacciatori. The item “47mm ACCIAIO INOX OPACO CASE per Inserto Meccanismo orologi MOSER NARDIN OMEGA &” is in sale since Tuesday, July 08, 2014. This item is in the category “Orologi e gioielli\Orologi, ricambi e accessori\Orologi da tasca”. The seller is “yevgen62″ and is located in Langenhagen, Niedersachsen. This item can be shipped worldwide.
  • Attenzione: SENZA fori per corona & spacciatori
  • Età: Moderno (2000-oggi)
  • MPN: nicht zutreffend
  • Anno Di Produzione: 2010-presente
  • Marca: Markenlos
  • Materiale: Acciaio
  • EAN: Non applicabile
Aug 19 2017

47mm STEEL Grade 316L CASE for INSERTING OF pocket watch movements 42-44mm

Posted by admin in 47mm
47mm STEEL Grade 316L CASE for INSERTING OF pocket watch movements 42-44mm

STAINLESS STEEL GLAZED CASE for inserting of the lepine (pocket watch) movements with GLASS BACK. Stainless Steel – Grade 316L. 3 pieces, glazed on both sides with mineral glass. 47,7 mm length from lugs to lugs appr. 70 mm lugs width appr. 22 mm For other measures see diagrams below. This case fit pocket watch movements as JWC Kal. 53, Longines, Tavannes, System Glashütte, Moser, Omega etc with size 42 – 44 mm. The wrist watches on the pictures are not for sale. EDELSTAHLGEHÄUSE mit GLASBODEN zum Einbau von Lepine Taschenuhrwerken. Hochglanzpolierte oder Matte Ausführung. 3 teilig, beidseitig mit Mineralglas verglast. Durchmesser ist von ca. 47,7 mm Länge inkl. 70 mm Bandanstoßbreite ca. 22 mm weitere Abmessungen finden Sie in den Abbildungen unten. Das Gehäuse ist zum Einbau von Lepine Taschenuhrwerken wie JWC Kal. 53, Longines, Tavannes, System Glashütte, Moser, Omega usw. Mit Durchmesser von ca. 42 – 44 mm. Die abgebildeten Armbanduhren stehen nicht zum Verkauf. Als Verbraucher können Sie den Kauf ohne Angaben von Gründen innerhalb eines Monats widerrufen. Weitere Infos dazu und unsere AGB finden Sie auf unserer m ich -Seite. You can read at German policy details on a m e -site. Gegen Aufpreis können Sie noch eine Aufzugskrone und einen Drücker bekommen. Fragen Sie bitte den Verkäufer. Die Kronen sind mit Durchmesser von 8,3mm und von 9,5mm und in polierter und mattierter Ausführung erhältlich. The crowns are available with a diameter of 8.3 mm and 9.5 mm and as polished or matte versions. The pushers are as matte and polished available. The item “47mm STEEL Grade 316L CASE for INSERTING OF pocket watch movements 42-44mm” is in sale since Friday, March 31, 2017. This item is in the category “Jewellery & Watches\Watches, Parts & Accessories\Parts, Tools & Guides\Watches for Parts”. The seller is “yevgen62″ and is located in Langenhagen. This item can be shipped worldwide.
  • ATTENTION: case is NOT pre-drilled for crown or pusher